blade maintenance problems

 Precision Panel Saw requirements: work, work should ensure that fixed profile positioning in line to eat cutting direction to avoid abnormal cut, do not exert side pressure or curve cutting, feed  abrasive grinding wheels to a smooth, avoid contact with the workpiece edge impact resistance, resulting in blade breakage, or workpiece flying out of an accident. Work, we found that abnormal sound and vibration, cutting surface roughness, or odor, you must immediately terminate the job, timely inspection, troubleshooting to avoid accidents. Cutting and stop cutting at the beginning, do not feed too fast to avoid broken teeth and damaged. If the cutting aluminum or other metal, to General purpose blade  use special cooling and lubrication fluid, to prevent overheating of the blade, resulting in tooth paste, and other damage, affecting the cutting quality. Flutes and suction equipment to ensure smooth flow of slag device to prevent slag accumulation into blocks, affecting production and safety. Dry cutting, do not long continuous cutting, so as not to affect the life of the blade and the cutting effect; wet sheet cutting, water jet cutting should be added, to guard against leakage.
Precision Panel Saw Blade Maintenance:Saw If not concrete saw blades  used immediately, it should be flat or use the hole to hang up, the blade can not be stacked horizontally with other items or foot, and pay attention to moisture and corrosion. When the blade is no longer sharp cutting surface roughness must be promptly re-grinding. Grinding can not change the original angle, and destruction balancing. Blade diameter correction, positioning hole machining, etc., must be carried out by the factory. If the processing is bad, will affect the product effect, and may be dangerous, reaming in principle can not exceed the original diameter 20mm, so as not to affect the balance of stress.