[ Alloy saw brand ] diamond saw cutting knowledge

1 , idle : in particular, the first use of a new base , the need to idle for about 30 minutes , the summer hot season needs to bring water idling , which aims to further eliminate welding head when matrix effects and enhanced blade rotating at high speed state to maintain the intrinsic quality of memory.
2 , blocks of not less than 0.5m3, and  carbide tipped saw blade placed securely , the bottom should be well- wood pad , plug SUCOOT prison , blocks should be located in symmetrical positions workbench , workbench cars and blocks to ensure the stability , without shaking , shaking phenomenon .
3 , according to the blocks of length, width, height adjusting limit switch, the blade lift and skip the trip in a reliable and effective range. Saw blade should leave before sawing blocks up to 10 ~ 20mm. After sawing , saw cut should be left away from the blocks at the bottom of 20-40mm, knife blade to go about running , you should exit all blocks Jukou  the blade from not less than 150-200mm, to prevent the blade hit Shortage material .
4 , the blade idling stable only after a trial cut  turbo diamond blade blocks are not allowed contact with the blade starts cutting edge blade , cutting blade rotation are not allowed to stop , to withdraw Jukou before stalling .
5 , cutting blocks are shaking if found should immediately stop cutting the blocks to be firmly fixed before it can continue working , cutting , are not allowed to move in any blocks.
6 , the cutting blade and  hole saw blades found a significant slowdown or even clip knife phenomenon , it may be belt slippage , compression nut loose or too large depth of cut , the cutting speed is too fast and other reasons, should be timely adjusted .
7 , the line speed should be processed stone hardness and wear resistance to adapt, line speed table are recommended cutting different types of stone .