Security requirements of the blade Which points

Saw-cut steel composite panels, rock wool sandwich panel saw, cutting

copper blade, cutting blade iron, aluminum cutting saw, woodworking saw

blades, PCD saw blades, precision panel saw blade, multi-saw Saw, Saw

exclusive diamond quartz material, non-porous GUSHI colde saw blade  ceramic stone dedicated

diamond saw blades, diamond saw marble, granite diamond saw.
 Maintenance of the blade:
1 blade If not used immediately, it should be flat or use the hole to

hang up, or other items can not be stacked on the flat of the blade

foot, and pay attention to moisture, anti-corrosion.
(2) When the blade is no longer sharp cutting surface roughness, it

must promptly re-grinding. Grinding can not change the original angle,

and destruction balancing.
3 inner diameter of the blade correction, the positioning hole

machining, etc., must be performed by the manufacturer. If the process

is bad, will affect the product effect, and potentially dangerous,

reaming should not be over the original aperture 20mm, so as not to

affect the balance of stress.
Blade requirements:
1, when the work piece should be fixed to ensure that, in line with

eating knife profiles positioning direction in order to avoid abnormal

cut, or not to apply lateral pressure curve cutting, smooth feed to

avoid the impact of the blade contacts the workpiece, resulting in

blade breakage, or workpiece flying, accident.
2, work and found abnormal sound  GUSHI sanding disc for drill and vibration, cutting surface

roughness, or odor, you must immediately terminate operations, timely

inspection, troubleshooting to avoid accidents.
3, at the start and stop cutting cutting, do not feed too fast to avoid

broken teeth and damaged.
4, if the cutting aluminum or other metal, to use a dedicated coolant

to prevent the blade from overheating, resulting in tooth paste, and

other damage, affecting the cutting quality.
5, flutes and suction equipment to ensure smooth flow of slag device to

prevent slag accumulation into blocks, affecting production and safety.
6, when dry cutting, do not cut long  GUSHI tct circular saw blades hours, so as not to affect the

life of the blade and the cutting effect; wet sheet cutting, water jet

cutting should be added, to guard against leakage.